Register

Basket

No products in the basket.

2016 gt250r EFI

FORUM ARCHIVE: Boards are now read-only as archives. For bike service manual downloads, parts shop, or to read more about the forum changes, tap here to read more....
Viewing 1 reply thread
  • Author
    Posts
    • Oct 17, 2024 at 1:35 AM #15217
      Yaniel Ramirez
      Participant

      Can someone pls help me im really tired of this bike i looked in a lot of forums and im sick of it the FI light is on and blinking i had to replace the flywheel with stator regulator, and a couple pf stuff as well… the FI light come in this pattern

      10-1-1-3-10-5-6-2-10-3-3-5

    • Oct 17, 2024 at 6:54 PM #15224
      ♠️ M77
      Keymaster

      335 crank sensor (probably wrong stator)

      113 Intake Air Temperature Sensor  (likely at fault)

      562 battery (recharge it  or its too old) (EFI is a hungry machine)

      Use the service manuals in this forum for EFI, to help you fix these error codes by testing them as the manual shows you how. or replace said gadgets

      Sometimes, the harness needs all plugs disconnected and cleaned out with contact cleaner and dry it 24hrs before fitting parts (as wet liquids & electrics don’t mix!)

      ACF50 will be the next bottle to use to stop connector plugs rotting in bad weather

  • Author
    Posts
Viewing 1 reply thread
  • You cannot reply to this topic.

FORUM ARCHIVE: Boards are now read-only as archives. For bike service manual downloads, parts shop, or to read more about the forum changes, tap here to read more....
Viewing 1 reply thread
  • Author
    Posts
    • Oct 17, 2024 at 1:35 AM #15217
      Yaniel Ramirez
      Participant

      Can someone pls help me im really tired of this bike i looked in a lot of forums and im sick of it the FI light is on and blinking i had to replace the flywheel with stator regulator, and a couple pf stuff as well… the FI light come in this pattern

      10-1-1-3-10-5-6-2-10-3-3-5

    • Oct 17, 2024 at 6:54 PM #15224
      ♠️ M77
      Keymaster

      335 crank sensor (probably wrong stator)

      113 Intake Air Temperature Sensor  (likely at fault)

      562 battery (recharge it  or its too old) (EFI is a hungry machine)

      Use the service manuals in this forum for EFI, to help you fix these error codes by testing them as the manual shows you how. or replace said gadgets

      Sometimes, the harness needs all plugs disconnected and cleaned out with contact cleaner and dry it 24hrs before fitting parts (as wet liquids & electrics don’t mix!)

      ACF50 will be the next bottle to use to stop connector plugs rotting in bad weather

  • Author
    Posts
Viewing 1 reply thread
  • You cannot reply to this topic.