Register
FORUM ARCHIVE: Boards are now read-only as archives. For bike service manual downloads, parts shop, or to read more about the forum changes, tap here to read more....
Viewing 2 reply threads
  • Author
    Posts
    • #10528
      Ryano
      Participant

      Hey,

      I got a 2009 gt250 naked, does any 1 have a wiring diagram or know if the circut is opened or closed with the stand up, the previous owned i belive tried to bypass the kickstand safety switch and in the process it burned up the wire half way down the bike…… and im trying to rewire it so any help is greatly appreciated, and ill post a couple pics down below.

    • #10530
      ♠️ M77
      Keymaster

      The sidestand is definitely  Wire One (BLACK & WHITE) and  Wire 2 (SOLID BROWN usually or brown/black) – It goes to the CDI unit.

      So i would join the two wires mentioned above ^ , then it is bypassed.

      While the harness is exposed, you would take extra time to remove more of the tape and make sure there isn’t anymore fishy jobs except Korea’s factory crimping of joining common wires. Do not panic if you see 6x orange wires join at one spot then branch off as 2 wires again. That’s korea!

    • #10532
      Ryano
      Participant

      Exactly what i needed to know, thanks a bunch, i was confused on how they had this ran,

      Thanks agin

      Ryan

      The sidestand is definitely Wire One (BLACK & WHITE) and Wire 2 (SOLID BROWN usually or brown/black) – It goes to the CDI unit.

      So i would join the two wires mentioned above ^ , then it is bypassed.

      While the harness is exposed, you would take extra time to remove more of the tape and make sure there isn’t anymore fishy jobs except Korea’s factory crimping of joining common wires. Do not panic if you see 6x orange wires join at one spot then branch off as 2 wires again. That’s korea!

Viewing 2 reply threads
  • You cannot reply to this topic.