Forums ๐Ÿ› MARKET PLACE ๐Ÿ› Hyoriders Shop The upgraded/braided vaccum lines… Bullshit

Tagged: 

Viewing 1 reply thread
  • Author
    Posts
    • #3893
      Gareth
      Member
      • Topics: 4
      • Replies: 3
      Joined:
      Feb 12, 2020
      @garfabbott
      Belfast northern ireland
      Gt125r 2009
      Points: 55

      In the shop on this site I purchased the upgraded braided air/vaccum lines… They came, and to my surprise it’s a piece of fuel pipe at about 30cm long which I could of got in my local motor factors for about ยฃ2.

      False advertising, not what it says on the ad at all! Very disappointed.

      Just to warn others that think It’s a good buy.

    • #3897
      โ™ ๏ธ MARCEL
      Administrator
      • Topics: 38
      • Replies: 367
      Joined:
      Feb 12, 2020
      @mf448kxn6
      North UK
      GTR
      Points: 4,217

      Hey Gareth.
      If you measured the line itself , it is 1 METER long.ย  = ยฃ4-5 there.
      Plus the clips ? a couple quid
      Plus the shipping fee? a couple quid (for us to post it to you)
      =ยฃ8ish is what you expected

      If you wanted 2 meters this would have been no issue at all to ship that extra (200cm)
      The hyosung doesn’t need 2 meters for simply vacuum pipes that deal with the tap and the rear pump.ย  The ad says what it is for and where it is used in the customer galleries.

      Sold hundreds now, without complaints. It is 1 meter long again.

      If you want a basic pipe that isn’t braided, can’t deal with hotter temps, won’t see itself lasting 10yrs even, is a smaller hole inside,ย  then I am sorry to tell you we don’t do cheap basic ยฃ2 pipes or fake rubber braided ones. Not worth the liability.
      Pressure test the pipe we sent you and vs the stock one. Go see which one bursts 1st.

      If you haven’t used it at all. Let us know please, we happily accept returns for it.

      Ride steady.

      // Meditation doesn't mean you have to sit still....

Viewing 1 reply thread
  • You must be logged in to reply to this topic.
Skip to toolbar